The contribution

of ambulatory BP monitoring (ABPM) to th

The contribution

of ambulatory BP monitoring (ABPM) to the management of hypertensive patients has been increasingly recognized through clinical and epidemiological research. Ambulatory BP monitoring can enhance the ability to detect white-coat or masked hypertension, determine the absence of nocturnal dipping status, and evaluate BP control in patients on antihypertensive therapy. Recently, the United Kingdom National Clinical Guideline Centre published guidelines for the clinical management of primary hypertension in adults, recommending the routine use of ABPM to make the initial diagnosis of hypertension. While the advantages of ABPM are apparent from a clinical perspective, its Screening Library use should be considered in relation to the cost of the equipment, data evaluation, and staff training as well as the possible inconvenience to the patient. In this review, we summarize the clinical Proteasome structure importance of ABPM and discuss the current guidelines for establishing

the diagnosis of hypertension.”
“We prepared a series of Bi1-xLaxFeO3 (0 <= x <= 0.2) ceramics with a sol-gel method and find that both the magnetization and dielectric constant show an abrupt anomaly near a critical field H-c, which is attributed to the destruction of the cycloidal antiferromagnetic spin structure. The critical field H-c decreases substantially from similar to 20 T for the x = 0 sample [Y. F. Popov et al., JETP Lett. 57, 69 (1993)] to similar to 2.8 T for the x = 0.17 sample and finally to 0 T for the x = 0.2 sample at room temperature (RT). It is also found that H-c increases with decreasing temperature. The variation of H-c with La substitution and temperature can be ascribed to the change in the magnetic

anisotropy and isotropic superexchange interaction, respectively. We have also discussed the magnetodielectric effects in these samples in terms of the Ginzburg-Landau theory and the selleck kinase inhibitor spin-phonon model. Moreover, increasing the doping level of La to 0.15 greatly improves the RT leakage-current and ferroelectric (FE) properties. A RT square-shaped FE hysteresis loop with remnant polarization (2P(r)) as high as similar to 64 mu C/cm(2) is obtained for the x = 0.15 sample. These results may be important for potential applications in BiFeO3-based magnetoelectric devices. (C) 2013 AIP Publishing LLC.”
“We report the electric-field-induced ferroelectric (FEIN) to antiferroelectric (AFE) phase transition that is tuned by the poling temperatures in 0.89Bi(0.5)Na(0.5)TiO(3)-0.06BaTiO(3)-0.05K(0.5)Na(0.5)NbO(3) (0.89BNT-0.06BT-0.05KNN) ceramics. Phase transition and pyroelectric behaviors of the ceramics were investigated as functions of temperature and electric field. Pyroelectric coefficient peaks of (3 similar to 6.5) x 10(-8) C cm(-2) K-1 are detected at about 10 degrees C above the poling temperatures for the samples poled at different temperatures.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>